Olas de tsunami se desplazan hacia Japón

HONOLULU, EEUU (AFP) – Olas de tsunami provocadas por un sismo de 8,8 grados de magnitud ocurrido este sábado en Chile, que dejó al menos 147 muertos, se desplazan a lo largo del Océano Pacífico y se dirigen hacia Japón, afirmó un responsable de la agencia meteorológica estadounidense.

The industrialend-user segment is also emerging as a significant source of retrofits, as plantowners have been investing in capacity expansions, new expansions, andrefurbishing aging power generation plants to improve productivity. Industrieshad invested substantially in brown field projects and maintenance and capacityreplacement in 2007, providing relief to gasket manufacturers. Although the economic slump is likely to defer a few industrial projects thatwere to be taken up in 2009 and 2010, the already initiated ones will go a longway in shoring up the gaskets market. The postponement of oil and gas expansionprojects will also curb the rapid growth of the market until 2010. “Decreasingoil prices are expected to reduce capacities until 2010, but with marketstabilization, the refurbishment of existing plants becomes necessary,” says theanalyst of this research. “The aftermarket business will see the gaskets marketsgrow moderately during this period.” Acknowledging the challenge of operating inthese difficult economic environments, companies all over the world are strivingto lower operational expenditure and improve returns on investment.

With manycompanies also looking to considerably downsize maintenance personnel forequipment repair or breakdown, there is a large market for products that offerbetter reliability and life cycle cost benefits. DUBLIN–(Business Wire)–Research and Markets( http://) hasannounced the addition of the “Three Case Studies in Technology Innovation(Apple, Google, Pixar)” report to their offering. This bundled report contains three innovation case studies, and focus on theinnovation efforts of Apple, Google, and Pixar. These three companies haveconsistently defined the cutting-edge in technology. In the Apple case study, learn how the company has re-emerged as one of theworld’s most innovative companies. Apple has managed to sustain its innovationefforts with calculated, consistent increases in R&D spending and rapid-firelaunches of new products and upgrades. Learn how Apple’s success has beenbecause the company has deliberately focused its efforts on generating betterideas faster.

In the Google case study, we take a look at their range of jaw-dropping productsand services that seem to literally tumble out of their innovation pipeline -Google Maps, Google Talk, and Google Page Creator to name just a few All ofthis innovation is backed by results. How do they manage to be so innovative -so consistently? Pixar is best known for its impressive track record of hit family movies,including: Toy Story 2, Finding Nemo, and The Incredibles. Pixar’s last sixmovies have grossed more than $3 billion in worldwide box office receipts, andPixar’s creative team members have won awards including Oscars, Gold Clios,Golden Globes and Grammys. What many filmgoers don’t know is that these greatartistic achievements were made possible by Pixar’s ability to create a climatethat fosters innovation. For more information visit http:// WoodSenior Fax from USA: 646-607-1907Fax from rest of the world: +353-1-481-1716 Copyright Business Wire 2009.

PARIS (AFP) – - La primera dama de Francia, Carla Bruni Sarkozy, confesó en un documental que será difundido en noviembre por un canal de televisión regional francés sobre los famosos y la terapia, que tras la muerte de su padre entró “con cuerpo y alma en el psicoanálisis”.

The KR 16will be executing dry tool paths of the waterjet process around complex 3D partswith quick change tooling ability to demonstrate milling, drilling, and materialhandling. The quick tool changing function uses KUKA`s hand teach device,allowing for automatic tool change function and enabling the user to teach atool path manually using a joystick while utilizing KUKA safe robot technology.The KR16 robotic cell demonstration was designed and supplied by FlowInternational Corporation. In a robotic cell designed and supplied by Official KUKA Robotics SystemPartner, Dyco Inc. the flexible, fast handling KR5 Sixx will be demonstratedutilizing a vision system. The vision system enables the KR5 Sixx to locate andpick random plastic bottles from a moving conveyor belt simulating loading puckcarriers. This same solution could be used for material handling to pick randombottles and load cases. KUKA Robotics will also display a KR5 Arc in a demo cell designed and suppliedby Electro-Hydraulic Automation an Official KUKA Robotics System Partner.

Thedemo cell shows the highly versatile KR5 ARC holding an air powered cutting toolto trim and cut holes in plastics parts, simulating the cuts used in vehicledashboard openings. KUKA Robotics will display an injection molding extraction cell using the KR5Sixx. The KR5 Sixx features the flexibility of variable mounting options offloor or ceiling along with fast handling capabilities, will simulate theextraction of medical syringes from an injection molding machine. The KUKA Robotics System Partner network is designed to mutually benefit eachorganization`s users by extending the way customers can access tailoredsolutions from experienced system partners with the major competitive andtechnological advantage of high precision KUKA robots.

EL CAIRO (AFP) – Centenares de manifestantes musulmanes incendiaron el sábado comercios pertenecientes a coptos en una ciudad del sur de Egipto y atacaron un puesto policial porque sospechaban que se encontraba en su interior un cristiano acusado de violar a una musulmana, según la policía.

The KR 16will be executing dry tool paths of the waterjet process around complex 3D partswith quick change tooling ability to demonstrate milling, drilling, and materialhandling. The quick tool changing function uses KUKA`s hand teach device,allowing for automatic tool change function and enabling the user to teach atool path manually using a joystick while utilizing KUKA safe robot technology.The KR16 robotic cell demonstration was designed and supplied by FlowInternational Corporation. In a robotic cell designed and supplied by Official KUKA Robotics SystemPartner, Dyco Inc. the flexible, fast handling KR5 Sixx will be demonstratedutilizing a vision system.

The vision system enables the KR5 Sixx to locate andpick random plastic bottles from a moving conveyor belt simulating loading puckcarriers. This same solution could be used for material handling to pick randombottles and load cases. KUKA Robotics will also display a KR5 Arc in a demo cell designed and suppliedby Electro-Hydraulic Automation an Official KUKA Robotics System Partner. Thedemo cell shows the highly versatile KR5 ARC holding an air powered cutting toolto trim and cut holes in plastics parts, simulating the cuts used in vehicledashboard openings. KUKA Robotics will display an injection molding extraction cell using the KR5Sixx.

TEGUCIGALPA (AFP) – El depuesto mandatario hondureño Manuel Zelaya agradece las gestiones del presidente de República Dominicana, Leonel Fernández, para resolver la crisis de Honduras, pero “hasta ahora” no tiene planes concretos para viajar a Santo Domingo, dijo este sábado un asesor.

The KR 16will be executing dry tool paths of the waterjet process around complex 3D partswith quick change tooling ability to demonstrate milling, drilling, and materialhandling. The quick tool changing function uses KUKA`s hand teach device,allowing for automatic tool change function and enabling the user to teach atool path manually using a joystick while utilizing KUKA safe robot technology.The KR16 robotic cell demonstration was designed and supplied by FlowInternational Corporation. In a robotic cell designed and supplied by Official KUKA Robotics SystemPartner, Dyco Inc. the flexible, fast handling KR5 Sixx will be demonstratedutilizing a vision system. The vision system enables the KR5 Sixx to locate andpick random plastic bottles from a moving conveyor belt simulating loading puckcarriers.

This same solution could be used for material handling to pick randombottles and load cases. KUKA Robotics will also display a KR5 Arc in a demo cell designed and suppliedby Electro-Hydraulic Automation an Official KUKA Robotics System Partner. Thedemo cell shows the highly versatile KR5 ARC holding an air powered cutting toolto trim and cut holes in plastics parts, simulating the cuts used in vehicledashboard openings. KUKA Robotics will display an injection molding extraction cell using the KR5Sixx. The KR5 Sixx features the flexibility of variable mounting options offloor or ceiling along with fast handling capabilities, will simulate theextraction of medical syringes from an injection molding machine. The KUKA Robotics System Partner network is designed to mutually benefit eachorganization`s users by extending the way customers can access tailoredsolutions from experienced system partners with the major competitive andtechnological advantage of high precision KUKA robots. The KUKA Robotics SystemPartner Network includes experienced system builders, system providers,application specialists and expert robot integrators.

KUKA robots are utilized in many different facets of the robotics industry fromautomotive, aerospace, consumer goods, logistics, food, pharmaceutical, medical,foundry and plastics industries and in multiple applications including materialhandling, packaging, palletizing, welding and surface finishing. For moreinformation contact KUKA Robotics at 866-873-5852 or visit their website at. About the KUKA Robot GroupKUKA Roboter GmbH, Augsburg, is a member of the KUKA Aktiengesellschaft andranks among the world`s leading suppliers of industrial robots. Corecompetencies are the development, production and sale of industrial robots,controllers, software and linear units.

The company is the market leader inGermany and Europe, and the number three in the world The KUKA Robot Groupemploys about 2,200 people worldwide. Of these, 1,200 are employed in Germany,either at the KUKA Robot Group headquarters in Augsburg, or at varioussubsidiaries In 2008, sales totaled 474 million euro. Twenty-six subsidiariesprovide a presence in the major markets of Europe, America and Asia.The KUKA logo is a registered trademark of KUKA Roboter GmbH KUKA, is atrademark of KUKA Roboter GmbH. All other trademarks are owned by theirrespective companies.KUKA Robotics CorporationMedia ContactRebecca MarkelMarketing ManagerPhone: Business Wire 2009. (Recasts on order against Google) Stocks  |  Media  |  China BEIJING, June 19 (Reuters) – China’s Internet watchdog onFriday ordered Google (GOOG.O) to stop overseas websites with”pornographic and vulgar” content from being accessed throughits Chinese-language search engine. The China Internet Illegal Information Reporting Centre hadtold Google to “make immediate changes” and clean up thecontent available through its search engine (),the official Xinhua news agency reported. The targetting of Google illustrates the difficulties facedby foreign Internet firms doing business in the world’s largestonline market while avoiding charges of censorship.

WASHINGTON (AFP) – El presidente de Estados Unidos, Barack Obama, anunciará su nueva estrategia para Afganistán en un discurso dirigido al país el próximo martes por la noche, informó este miércoles la Casa Blanca.

The KR 16will be executing dry tool paths of the waterjet process around complex 3D partswith quick change tooling ability to demonstrate milling, drilling, and materialhandling. The quick tool changing function uses KUKA`s hand teach device,allowing for automatic tool change function and enabling the user to teach atool path manually using a joystick while utilizing KUKA safe robot technology.The KR16 robotic cell demonstration was designed and supplied by FlowInternational Corporation. In a robotic cell designed and supplied by Official KUKA Robotics SystemPartner, Dyco Inc. the flexible, fast handling KR5 Sixx will be demonstratedutilizing a vision system. The vision system enables the KR5 Sixx to locate andpick random plastic bottles from a moving conveyor belt simulating loading puckcarriers.

This same solution could be used for material handling to pick randombottles and load cases. KUKA Robotics will also display a KR5 Arc in a demo cell designed and suppliedby Electro-Hydraulic Automation an Official KUKA Robotics System Partner. Thedemo cell shows the highly versatile KR5 ARC holding an air powered cutting toolto trim and cut holes in plastics parts, simulating the cuts used in vehicledashboard openings. KUKA Robotics will display an injection molding extraction cell using the KR5Sixx. The KR5 Sixx features the flexibility of variable mounting options offloor or ceiling along with fast handling capabilities, will simulate theextraction of medical syringes from an injection molding machine. The KUKA Robotics System Partner network is designed to mutually benefit eachorganization`s users by extending the way customers can access tailoredsolutions from experienced system partners with the major competitive andtechnological advantage of high precision KUKA robots. The KUKA Robotics SystemPartner Network includes experienced system builders, system providers,application specialists and expert robot integrators.

LA HABANA (AFP) – El músico argentino Fito Páez admitió el martes en La Habana que en su juventud pudo ser un apasionado de la revolución cubana, pero que, a sus 46 años, el tiempo “atempera los fuegos pasionales” y ahora ve como lo más importante “el respeto por la vida humana”.

The KR 16will be executing dry tool paths of the waterjet process around complex 3D partswith quick change tooling ability to demonstrate milling, drilling, and materialhandling. The quick tool changing function uses KUKA`s hand teach device,allowing for automatic tool change function and enabling the user to teach atool path manually using a joystick while utilizing KUKA safe robot technology.The KR16 robotic cell demonstration was designed and supplied by FlowInternational Corporation. In a robotic cell designed and supplied by Official KUKA Robotics SystemPartner, Dyco Inc. the flexible, fast handling KR5 Sixx will be demonstratedutilizing a vision system.

The vision system enables the KR5 Sixx to locate andpick random plastic bottles from a moving conveyor belt simulating loading puckcarriers. This same solution could be used for material handling to pick randombottles and load cases. KUKA Robotics will also display a KR5 Arc in a demo cell designed and suppliedby Electro-Hydraulic Automation an Official KUKA Robotics System Partner. Thedemo cell shows the highly versatile KR5 ARC holding an air powered cutting toolto trim and cut holes in plastics parts, simulating the cuts used in vehicledashboard openings. KUKA Robotics will display an injection molding extraction cell using the KR5Sixx. The KR5 Sixx features the flexibility of variable mounting options offloor or ceiling along with fast handling capabilities, will simulate theextraction of medical syringes from an injection molding machine.

The KUKA Robotics System Partner network is designed to mutually benefit eachorganization`s users by extending the way customers can access tailoredsolutions from experienced system partners with the major competitive andtechnological advantage of high precision KUKA robots. The KUKA Robotics SystemPartner Network includes experienced system builders, system providers,application specialists and expert robot integrators. KUKA robots are utilized in many different facets of the robotics industry fromautomotive, aerospace, consumer goods, logistics, food, pharmaceutical, medical,foundry and plastics industries and in multiple applications including materialhandling, packaging, palletizing, welding and surface finishing. For moreinformation contact KUKA Robotics at 866-873-5852 or visit their website at. About the KUKA Robot GroupKUKA Roboter GmbH, Augsburg, is a member of the KUKA Aktiengesellschaft andranks among the world`s leading suppliers of industrial robots. Corecompetencies are the development, production and sale of industrial robots,controllers, software and linear units. The company is the market leader inGermany and Europe, and the number three in the world The KUKA Robot Groupemploys about 2,200 people worldwide.

Of these, 1,200 are employed in Germany,either at the KUKA Robot Group headquarters in Augsburg, or at varioussubsidiaries In 2008, sales totaled 474 million euro. Twenty-six subsidiariesprovide a presence in the major markets of Europe, America and Asia.The KUKA logo is a registered trademark of KUKA Roboter GmbH KUKA, is atrademark of KUKA Roboter GmbH. All other trademarks are owned by theirrespective companies.KUKA Robotics CorporationMedia ContactRebecca MarkelMarketing ManagerPhone: Business Wire 2009. (Recasts on order against Google) Stocks  |  Media  |  China BEIJING, June 19 (Reuters) – China’s Internet watchdog onFriday ordered Google (GOOG.O) to stop overseas websites with”pornographic and vulgar” content from being accessed throughits Chinese-language search engine. The China Internet Illegal Information Reporting Centre hadtold Google to “make immediate changes” and clean up thecontent available through its search engine (),the official Xinhua news agency reported. The targetting of Google illustrates the difficulties facedby foreign Internet firms doing business in the world’s largestonline market while avoiding charges of censorship.

CLEVELAND, EEUU (AFP) – Desde hacía años, los vecinos de Anthony Sowell se quejaban del mal olor que cubría la manzana, sin sospechar que provenía de diez cadáveres en descomposición que estaban escondidos en la casa de este habitante de Cleveland, en el norte de Estados Unidos.

The KR 16will be executing dry tool paths of the waterjet process around complex 3D partswith quick change tooling ability to demonstrate milling, drilling, and materialhandling. The quick tool changing function uses KUKA`s hand teach device,allowing for automatic tool change function and enabling the user to teach atool path manually using a joystick while utilizing KUKA safe robot technology.The KR16 robotic cell demonstration was designed and supplied by FlowInternational Corporation. In a robotic cell designed and supplied by Official KUKA Robotics SystemPartner, Dyco Inc. the flexible, fast handling KR5 Sixx will be demonstratedutilizing a vision system. The vision system enables the KR5 Sixx to locate andpick random plastic bottles from a moving conveyor belt simulating loading puckcarriers. This same solution could be used for material handling to pick randombottles and load cases. KUKA Robotics will also display a KR5 Arc in a demo cell designed and suppliedby Electro-Hydraulic Automation an Official KUKA Robotics System Partner.

Thedemo cell shows the highly versatile KR5 ARC holding an air powered cutting toolto trim and cut holes in plastics parts, simulating the cuts used in vehicledashboard openings. KUKA Robotics will display an injection molding extraction cell using the KR5Sixx. The KR5 Sixx features the flexibility of variable mounting options offloor or ceiling along with fast handling capabilities, will simulate theextraction of medical syringes from an injection molding machine. The KUKA Robotics System Partner network is designed to mutually benefit eachorganization`s users by extending the way customers can access tailoredsolutions from experienced system partners with the major competitive andtechnological advantage of high precision KUKA robots. The KUKA Robotics SystemPartner Network includes experienced system builders, system providers,application specialists and expert robot integrators. KUKA robots are utilized in many different facets of the robotics industry fromautomotive, aerospace, consumer goods, logistics, food, pharmaceutical, medical,foundry and plastics industries and in multiple applications including materialhandling, packaging, palletizing, welding and surface finishing. For moreinformation contact KUKA Robotics at 866-873-5852 or visit their website at.

LONDRES (AFP) – Los tripulantes de cabina de British Airways llevaban a cabo este lunes el tercero de sus cuatro días de huelga en medio de nuevos desacuerdos entre el sindicato y la compañía británica sobre su impacto, mientras la oposición parecía haber encontrado un nuevo filón electoral.

The industrialend-user segment is also emerging as a significant source of retrofits, as plantowners have been investing in capacity expansions, new expansions, andrefurbishing aging power generation plants to improve productivity. Industrieshad invested substantially in brown field projects and maintenance and capacityreplacement in 2007, providing relief to gasket manufacturers. Although the economic slump is likely to defer a few industrial projects thatwere to be taken up in 2009 and 2010, the already initiated ones will go a longway in shoring up the gaskets market. The postponement of oil and gas expansionprojects will also curb the rapid growth of the market until 2010.

“Decreasingoil prices are expected to reduce capacities until 2010, but with marketstabilization, the refurbishment of existing plants becomes necessary,” says theanalyst of this research. “The aftermarket business will see the gaskets marketsgrow moderately during this period.” Acknowledging the challenge of operating inthese difficult economic environments, companies all over the world are strivingto lower operational expenditure and improve returns on investment. With manycompanies also looking to considerably downsize maintenance personnel forequipment repair or breakdown, there is a large market for products that offerbetter reliability and life cycle cost benefits. DUBLIN–(Business Wire)–Research and Markets( http://) hasannounced the addition of the “Three Case Studies in Technology Innovation(Apple, Google, Pixar)” report to their offering.

This bundled report contains three innovation case studies, and focus on theinnovation efforts of Apple, Google, and Pixar. These three companies haveconsistently defined the cutting-edge in technology. In the Apple case study, learn how the company has re-emerged as one of theworld’s most innovative companies. Apple has managed to sustain its innovationefforts with calculated, consistent increases in R&D spending and rapid-firelaunches of new products and upgrades.

MADRID (AFP) – Un nuevo equipo patrocinado por la marca de calzado ‘Camper’, con base en España y dirigido por los ‘kiwis’ del Team New Zealand, participará en la edición 2011-12 de la Volvo Ocean Race, la vuelta al mundo en veleros monocascos, anunció el lunes la organización de la regata.

NEW YORK–(Business Wire)–Fitch Ratings has updated its U.S. CMBS servicer rating criteria to reflectcurrent commercial real estate (CRE) market conditions and their effect onmortgage servicing. These changes have resulted in moderate rating movement(both upgrades and downgrades) for certain servicers, as detailed in severalpress releases also published today. The three main changes to the existing criteria are as follows: –The first change addresses the servicer’s financial rating. Fitch hasincreased its financial weightings for both master and special servicer ratingsto better reflect its significance; –The second relates to employee experience.

Fitch increased its scoring hurdlesin management and staff experience to reflect this view; –Finally, due to the increased complexity of recent vintage CMBS servicing,Fitch has increased emphasis on the servicer’s participation in the CMBS marketover the past few years. Additional information about Fitch’s updated commercial mortgage servicercriteria is available in a full report also released today (‘U.S. CommercialMortgage Servicer Rating Criteria’) which is available at the following headers: Structured Finance >> Operational Risk Group >> Criteria Reports >> CMBS In conjunction with the rollout of the new servicer criteria, Fitch upgraded anddowngraded 16 ratings across 12 companies. Upgrades were made for the followingcompanies: –CWCapital LLC (primary and master servicer); –CWCapital Asset Management LLC (special servicer); –The Bank of New York Mellon – Asset Solutions Division (primary and masterservicer) Downgrades were taken on: –Archon Group, L.P (special servicer); –Centerline Servicing Inc. (special servicer); –CT Investment Management Co., LLC (special servicer); –Hudson Advisors, LLC (special servicer); –J.E Robert Companies (special servicer); –LNR Partners, Inc.

JOHANNESBURGO, Sudáfrica (AFP) – El tenis español David Ferrer, segundo cabeza de serie del Torneo ATP de Johannesburgo, superó este jueves la segunda ronda al ganar al sueco Filip Prpic, en dos mangas, por 6-3 y 6-4.

(NASDAQ:AEZS; TSX: AEZ), a global biopharmaceutical company focused on endocrinetherapy and oncology, announced today that it has received commitments topurchase US$10 million of units comprised of common shares and common sharepurchase warrants in a registered direct offering. AEterna Zentaris expects toreceive net proceeds of approximately US$9.25 million after deductingplacement agent fees and other offering expenses. Under the terms of aSecurities Purchase Agreement, the Company will sell to such institutionalinvestors an aggregate of 5,319,149 common shares of its capital at a price ofUS$1.88 per share and issue warrants to acquire an aggregate of 1,861,702common shares at an exercise price of US$2.06 per share.The warrants to purchase additional common shares of AEterna Zentaris will beexercisable beginning three months after issuance and will expire 30 monthsafter issuance. All of the common shares and warrants were offered pursuant toan effective shelf registration statement. Proceeds from the transaction willbe used for general corporate purposes, including clinical development of ourleading oncology and endocrinology compounds.

The offering is expected to beconsummated no later than June 24, 2009, subject to customary closingconditions.Rodman & Renshaw, LLC, a subsidiary of Rodman & Renshaw Capital Group, Inc.,(Nasdaq: RODM ( )), acted as the exclusiveplacement agent for the transaction. The placement agent will receivethirty-month warrants, exercisable beginning six months after issuance, topurchase 287,234 common shares at US$2.35 per share.In connection with the offering, the Company will file a prospectus supplementto its existing base shelf prospectus with the Canadian securities regulatoryauthorities and with the Securities and Exchange Commission. Copies of theprospectus supplement and accompanying prospectus may be obtained directlyfrom the Company or by contacting AEterna Zentaris Inc., 1405 duParc-Technologique Boulevard, Quebec City, Canada G1P 4P5.This press release shall not constitute an offer to sell or a solicitation ofan offer to buy any securities nor shall there be any sale of such securitiesin any jurisdiction in which such offer, solicitation or sale would beunlawful prior to registration or qualification under the securities laws ofany such jurisdiction. This offering is being made by means of a prospectussupplement to the Company’s existing base prospectus that is part of its shelfregistration statement previously filed with and declared effective by theSecurities and Exchange Commission.About AEterna Zentaris Inc.AEterna Zentaris Inc. is a global biopharmaceutical company focused onendocrine therapy and oncology, with proven expertise in drug discovery,development and commercialization. News releases and additional informationare available at StatementsThis press release contains forward-looking statements made pursuant to thesafe harbor provisions of the U.S. Securities Litigation Reform Act of 1995.Forward-looking statements involve known and unknown risks and uncertainties,which could cause the Company’s actual results to differ materially from thosein the forward-looking statements.

CONAKRY (AFP) – - Disparos contra la multitud, mujeres violadas, opositores apaleados: numerosos testigos denuncian la violencia inaudita de los militares al aplastar a sangre y fuego el lunes una manifestación pacífica en un estadio de Conakry.

The KR 16will be executing dry tool paths of the waterjet process around complex 3D partswith quick change tooling ability to demonstrate milling, drilling, and materialhandling. The quick tool changing function uses KUKA`s hand teach device,allowing for automatic tool change function and enabling the user to teach atool path manually using a joystick while utilizing KUKA safe robot technology.The KR16 robotic cell demonstration was designed and supplied by FlowInternational Corporation. In a robotic cell designed and supplied by Official KUKA Robotics SystemPartner, Dyco Inc. the flexible, fast handling KR5 Sixx will be demonstratedutilizing a vision system. The vision system enables the KR5 Sixx to locate andpick random plastic bottles from a moving conveyor belt simulating loading puckcarriers.

This same solution could be used for material handling to pick randombottles and load cases. KUKA Robotics will also display a KR5 Arc in a demo cell designed and suppliedby Electro-Hydraulic Automation an Official KUKA Robotics System Partner. Thedemo cell shows the highly versatile KR5 ARC holding an air powered cutting toolto trim and cut holes in plastics parts, simulating the cuts used in vehicledashboard openings. KUKA Robotics will display an injection molding extraction cell using the KR5Sixx. The KR5 Sixx features the flexibility of variable mounting options offloor or ceiling along with fast handling capabilities, will simulate theextraction of medical syringes from an injection molding machine. The KUKA Robotics System Partner network is designed to mutually benefit eachorganization`s users by extending the way customers can access tailoredsolutions from experienced system partners with the major competitive andtechnological advantage of high precision KUKA robots. The KUKA Robotics SystemPartner Network includes experienced system builders, system providers,application specialists and expert robot integrators.

KUKA robots are utilized in many different facets of the robotics industry fromautomotive, aerospace, consumer goods, logistics, food, pharmaceutical, medical,foundry and plastics industries and in multiple applications including materialhandling, packaging, palletizing, welding and surface finishing. For moreinformation contact KUKA Robotics at 866-873-5852 or visit their website at. About the KUKA Robot GroupKUKA Roboter GmbH, Augsburg, is a member of the KUKA Aktiengesellschaft andranks among the world`s leading suppliers of industrial robots. Corecompetencies are the development, production and sale of industrial robots,controllers, software and linear units. The company is the market leader inGermany and Europe, and the number three in the world The KUKA Robot Groupemploys about 2,200 people worldwide. Of these, 1,200 are employed in Germany,either at the KUKA Robot Group headquarters in Augsburg, or at varioussubsidiaries In 2008, sales totaled 474 million euro.

Twenty-six subsidiariesprovide a presence in the major markets of Europe, America and Asia.The KUKA logo is a registered trademark of KUKA Roboter GmbH KUKA, is atrademark of KUKA Roboter GmbH. All other trademarks are owned by theirrespective companies.KUKA Robotics CorporationMedia ContactRebecca MarkelMarketing ManagerPhone: Business Wire 2009. (Recasts on order against Google) Stocks  |  Media  |  China BEIJING, June 19 (Reuters) – China’s Internet watchdog onFriday ordered Google (GOOG.O) to stop overseas websites with”pornographic and vulgar” content from being accessed throughits Chinese-language search engine. The China Internet Illegal Information Reporting Centre hadtold Google to “make immediate changes” and clean up thecontent available through its search engine (),the official Xinhua news agency reported. The targetting of Google illustrates the difficulties facedby foreign Internet firms doing business in the world’s largestonline market while avoiding charges of censorship. In an emailed statement, Google said it met with governmentofficials to discuss the problem of “pornographic content andmaterial that is harmful to children on the web in China”.

They did pretty well starting things off in’08, almost single-handedly outscoring Syracuse in the opener with a safety andTD. Program members can benefit from a variety of business and market developmenttools and resources within i365`s Partner Program, including:* Infrastructure such as the Partner Program online portal, a secure directorythat houses a variety of self-help training and market development resources. patent 5,329,369 (the “‘369 patent”) is invalid is now final.In aseparate action just days ago, the U.S. Woori, a unit of Woori Finance Holdings (053000.KS) (WF.N),is also considering issuing exchangeable bonds for $400 millionof subordinated debt for which the bank decided last week not toexercise a call option, Woori Bank Chief Executive Lee Chonghwisaid on Monday. BEIJING, and SANTA CLARA, Calif., Feb 17 /PRNewswire-Asia-FirstCall/ –AsiaInfo Holdings, Inc.

Among the factors that could cause actual results to differmaterially are changes in economic trends and financial performance, changes inconsumer demands, tastes and fashion trends, lowered levels of consumer spendingresulting from a general economic downturn, shifts in market demand resulting ininventory risks, changes in foreign currency rates, and the outcome of currentand possible future litigation, as well as the risks and uncertainties set forthin the Company’s Annual Report on Form 10-K for the fiscal year ended January 5,2008 and its Form 10-Q reports filed with the Securities and ExchangeCommission.About FossilFossil is a global design, marketing and distribution company that specializesin consumer fashion accessories. 2 position on a club with needs at quarterback.Of course, any such move would leave Minnesota without a long-term plan at the position, but at this point, it’s not clear that Jackson still fits that description.Rosenfels Gets Moved If……the team doesn’t think it can get him the preseason action he needs to back up Favre effectively.Before the Favre courtship began, there were plenty of training camp snaps available to get Rosenfels acclimated in the offense and to hold a quarterback derby with Jackson if necessary.But Favre will have plenty of work to do in camp himself. With Iverson still on the market, the team looks like it was right to be patient.The thought of bringing in players such as Boozer, Odom, and Iverson have Heat fans in a tizzy of the possibilities of what magic Wade can work with these players.But to be a smart fan is to be a patient fan, and that is the only way we are going to get out of this offseason with patience.. Amare would be a good fit in the Warrior’s run and gun system, and could flourish in Don Nelson’s system He is a proven player and a dynamic one at that. I’ve had discussions with his agent, Rich Winter, and (Hasek) wants to come back,” said Senators GM John Muckler. Total shipmentvolumes were down 42% compared to the previous quarter, and down 67%compared to the fourth quarter of 2007, principally as a result of thefire that destroyed the North Central Plywoods (“NCP”) facility at PrinceGeorge, B.C. Jason Robinson reserve defensive back is an extremely physical player and most likely will see some action along with Doug Martin in the nickel.Cedric Febis, Garcia Day, and Jamar Taylor are a few more Bronco secondary reservist that will force offensive units into a continuous array of bad judgment calls.Other than death and taxes there are two things one can count on at Boise State those are quarterbacks and the defensive secondary will be as good as it gets.Scheduled first to sample the “09″ wares of the Boise State Broncos are the Oregon Ducks.

[nN19520115] GERMAN STIMULUS Germany’s upper house approved a 50 billion euro ($62.88billion) stimulus package on Friday to help it withstand itsworst recession since World War Two. Ultimately, it willbe up to Congress and the Obama Administration to determine the overallstructure of financial services regulation and how insurance fits into thatstructure.” “The Promontory study offers important insights into what a federal insuranceregulatory agency could look like and what it could cost,” added Barak J.Sanford, the Promontory Managing Director who spearheaded the study. For additional information, please visit – In the largest such effort in the nation, Pennsylvania willconduct comprehensive energy audits to determine the most appropriate andcost-effective improvements for increasing energy efficiency in rental homes.Results will help reduce anticipated 40 to 60 percent increases in utilityexpenses in affordable rental housing serving some of Pennsylvania’s neediestfamilies Pennsylvania is receiving a $1 million MacArthur grant. rates him as a polished run blocker with above average upper body strength and no character issues.Grade: BLang is a great value in the fourth round, and the pick addresses another one of the Packers glaring needs. We wanted toexploit cryptographic technology and the internet to achieve a highlysecure network that could be up and running quickly and keep cost down toa minimum without compromising security. He also spent 21 years directing the Fed’s international finance division before that.He told Reuters by email that he was working at Treasury to “help out for six weeks, not for any political appointment.”Nominees for jobs at the assistant secretary level and higher must be confirmed by the Senate, but lower-level and adviser positions do not need Senate confirmation. This is not the case in some countries of the EU.Most countries of South America, Africa and Asia do not have a testingprogram.

Net investment income was $65 million in the fourth quarter of 2008 comparedwith $60 million in 2007. His UCLA teams also had four perfect 30-0 seasons in his tenure. Tel: +86-135-1085-5460 Email: Web: http:// Relations Contact: Mr. Declares First Quarter 2009 Dividend, Announces2009 Annual Stockholders’ Meeting Details and Provides Notification ofQuarterly Conference Call’We build the buildings for the high tech companies that build the internet’CUPERTINO, Calif., March 17 /PRNewswire-FirstCall/ — Mission West Properties,Inc. EST GamesBelmont Kennesaw State >> Matt Dotson, Belmont9:00 P.M. Verlander is still only 26, and if he can rebound, he could be a top 10 ace again. No.  UPenn is like eggshell paint: practical, functional–and totally forgettable  Even M Night Shamalama-ding-dong.

To sum up my Examiner write-up of the commitment, just know that it’s a BIG get for us.2 Rodney Garner is staying at UGA Just yesterday I said he was 99 percent sure to be gone Then, he just changed his mind. Unless things change soon, I fear it may be too late to save the mighty Glasgow Rangers.. foreign aid: focus onfighting poverty, streamline and coordinate all sources of U.S. If he buys Lady Nina Bracewell’s shares then he will have to make an official takeover bid. Turns out that Kiffin took that exam well in advance of Sunday’s first recruiting call.Still, one question comes to mind in this whole situation: Will this Boy Wonder become the Caped Crusader?Beyond the tremendous show that was the initial press conference, beyond all the hype, and beyond all the talk, there’s reason to believe this hire could be a home run or a ground ball double play for Mike Hamilton and Kiffin.The man is young; he’ll be 34 at the beginning of the ’09 season Some see this as a problem I see it as more of an asset.

LAGOS (AFP) – Más de 500 habitantes de aldeas cristianas murieron a machetazos y quemados en ataques perpetrados el fin de semana por ganaderos musulmanes en el centro de Nigeria, escenario de enfrentamientos religiosos y étnicos, generando “dolor y preocupación” en el Vaticano y la ONU.

The industrialend-user segment is also emerging as a significant source of retrofits, as plantowners have been investing in capacity expansions, new expansions, andrefurbishing aging power generation plants to improve productivity. Industrieshad invested substantially in brown field projects and maintenance and capacityreplacement in 2007, providing relief to gasket manufacturers. Although the economic slump is likely to defer a few industrial projects thatwere to be taken up in 2009 and 2010, the already initiated ones will go a longway in shoring up the gaskets market. The postponement of oil and gas expansionprojects will also curb the rapid growth of the market until 2010.

“Decreasingoil prices are expected to reduce capacities until 2010, but with marketstabilization, the refurbishment of existing plants becomes necessary,” says theanalyst of this research. “The aftermarket business will see the gaskets marketsgrow moderately during this period.” Acknowledging the challenge of operating inthese difficult economic environments, companies all over the world are strivingto lower operational expenditure and improve returns on investment. With manycompanies also looking to considerably downsize maintenance personnel forequipment repair or breakdown, there is a large market for products that offerbetter reliability and life cycle cost benefits. DUBLIN–(Business Wire)–Research and Markets( http://) hasannounced the addition of the “Three Case Studies in Technology Innovation(Apple, Google, Pixar)” report to their offering. This bundled report contains three innovation case studies, and focus on theinnovation efforts of Apple, Google, and Pixar. These three companies haveconsistently defined the cutting-edge in technology.

FRÁNCFORT, Alemania (AFP) – El grupo químico Henkel y el constructor automotriz Daimler anunciaron este martes haber puesto punto final a un litigio que los enfrentaba, vinculado a un contrato de patrocinio de la escudería Brawn GP de Fórmula 1.

The KR 16will be executing dry tool paths of the waterjet process around complex 3D partswith quick change tooling ability to demonstrate milling, drilling, and materialhandling. The quick tool changing function uses KUKA`s hand teach device,allowing for automatic tool change function and enabling the user to teach atool path manually using a joystick while utilizing KUKA safe robot technology.The KR16 robotic cell demonstration was designed and supplied by FlowInternational Corporation. In a robotic cell designed and supplied by Official KUKA Robotics SystemPartner, Dyco Inc. the flexible, fast handling KR5 Sixx will be demonstratedutilizing a vision system.

The vision system enables the KR5 Sixx to locate andpick random plastic bottles from a moving conveyor belt simulating loading puckcarriers. This same solution could be used for material handling to pick randombottles and load cases. KUKA Robotics will also display a KR5 Arc in a demo cell designed and suppliedby Electro-Hydraulic Automation an Official KUKA Robotics System Partner. Thedemo cell shows the highly versatile KR5 ARC holding an air powered cutting toolto trim and cut holes in plastics parts, simulating the cuts used in vehicledashboard openings. KUKA Robotics will display an injection molding extraction cell using the KR5Sixx.

MÉXICO (AFP) – Al menos 23 presos murieron este miércoles en una riña entre bandas rivales en el interior de un centro penitenciario del estado mexicano de Durango (noroeste), informó la Procuraduría de Justicia de ese distrito.

(NASDAQ:AEZS; TSX: AEZ), a global biopharmaceutical company focused on endocrinetherapy and oncology, announced today that it has received commitments topurchase US$10 million of units comprised of common shares and common sharepurchase warrants in a registered direct offering. AEterna Zentaris expects toreceive net proceeds of approximately US$9.25 million after deductingplacement agent fees and other offering expenses. Under the terms of aSecurities Purchase Agreement, the Company will sell to such institutionalinvestors an aggregate of 5,319,149 common shares of its capital at a price ofUS$1.88 per share and issue warrants to acquire an aggregate of 1,861,702common shares at an exercise price of US$2.06 per share.The warrants to purchase additional common shares of AEterna Zentaris will beexercisable beginning three months after issuance and will expire 30 monthsafter issuance. All of the common shares and warrants were offered pursuant toan effective shelf registration statement.

Proceeds from the transaction willbe used for general corporate purposes, including clinical development of ourleading oncology and endocrinology compounds. The offering is expected to beconsummated no later than June 24, 2009, subject to customary closingconditions.Rodman & Renshaw, LLC, a subsidiary of Rodman & Renshaw Capital Group, Inc.,(Nasdaq: RODM ( )), acted as the exclusiveplacement agent for the transaction. The placement agent will receivethirty-month warrants, exercisable beginning six months after issuance, topurchase 287,234 common shares at US$2.35 per share.In connection with the offering, the Company will file a prospectus supplementto its existing base shelf prospectus with the Canadian securities regulatoryauthorities and with the Securities and Exchange Commission. Copies of theprospectus supplement and accompanying prospectus may be obtained directlyfrom the Company or by contacting AEterna Zentaris Inc., 1405 duParc-Technologique Boulevard, Quebec City, Canada G1P 4P5.This press release shall not constitute an offer to sell or a solicitation ofan offer to buy any securities nor shall there be any sale of such securitiesin any jurisdiction in which such offer, solicitation or sale would beunlawful prior to registration or qualification under the securities laws ofany such jurisdiction. This offering is being made by means of a prospectussupplement to the Company’s existing base prospectus that is part of its shelfregistration statement previously filed with and declared effective by theSecurities and Exchange Commission.About AEterna Zentaris Inc.AEterna Zentaris Inc.

is a global biopharmaceutical company focused onendocrine therapy and oncology, with proven expertise in drug discovery,development and commercialization. News releases and additional informationare available at StatementsThis press release contains forward-looking statements made pursuant to thesafe harbor provisions of the U.S. Securities Litigation Reform Act of 1995.Forward-looking statements involve known and unknown risks and uncertainties,which could cause the Company’s actual results to differ materially from thosein the forward-looking statements. Such risks and uncertainties include, amongothers, the availability of funds and resources to pursue R&D projects, thesuccessful and timely completion of clinical studies, the ability of theCompany to take advantage of business opportunities in the pharmaceuticalindustry, uncertainties related to the regulatory process and general changesin economic conditions. Investors should consult the Company’s quarterly andannual filings with the Canadian and U.S. securities commissions foradditional information on risks and uncertainties relating to theforward-looking statements. Investors are cautioned not to rely on theseforward-looking statements.

The Company does not undertake to update theseforward-looking statements. We disclaim any obligation to update any suchfactors or to publicly announce the result of any revisions to any of theforward-looking statements contained herein to reflect future results, eventsor developments except if we are requested by a governmental authority orapplicable law.SOURCEAETERNA ZENTARIS INC.Investor Relations: Ginette Vallieres, Investor Relations Coordinator, (418)652-8525 ext. 265, ; Media Relations: Paul Burroughs,Director of Communications, (418) 652-8525 ext. 406, . FREDERICK, MD, Jun 19 (MARKET WIRE) — BioElectronics Corp. (PINKSHEETS: BIEL), the maker of inexpensive,disposable drug-free anti-inflammatory devices, today provided itsinvestors with a summary of the conference call held after the marketclosed on Thursday, June 18th.

WASHINGTON (AFP) – - Las fuerzas militares de Estados Unidos lanzaron una búsqueda nocturna de un piloto desaparecido sobre el océano Atlántico después de que dos aviones de combate F-16 chocaran en el aire, informó la fuerza aérea estadounidense.

The KR 16will be executing dry tool paths of the waterjet process around complex 3D partswith quick change tooling ability to demonstrate milling, drilling, and materialhandling. The quick tool changing function uses KUKA`s hand teach device,allowing for automatic tool change function and enabling the user to teach atool path manually using a joystick while utilizing KUKA safe robot technology.The KR16 robotic cell demonstration was designed and supplied by FlowInternational Corporation. In a robotic cell designed and supplied by Official KUKA Robotics SystemPartner, Dyco Inc. the flexible, fast handling KR5 Sixx will be demonstratedutilizing a vision system.

The vision system enables the KR5 Sixx to locate andpick random plastic bottles from a moving conveyor belt simulating loading puckcarriers. This same solution could be used for material handling to pick randombottles and load cases. KUKA Robotics will also display a KR5 Arc in a demo cell designed and suppliedby Electro-Hydraulic Automation an Official KUKA Robotics System Partner. Thedemo cell shows the highly versatile KR5 ARC holding an air powered cutting toolto trim and cut holes in plastics parts, simulating the cuts used in vehicledashboard openings. KUKA Robotics will display an injection molding extraction cell using the KR5Sixx. The KR5 Sixx features the flexibility of variable mounting options offloor or ceiling along with fast handling capabilities, will simulate theextraction of medical syringes from an injection molding machine.

The KUKA Robotics System Partner network is designed to mutually benefit eachorganization`s users by extending the way customers can access tailoredsolutions from experienced system partners with the major competitive andtechnological advantage of high precision KUKA robots. The KUKA Robotics SystemPartner Network includes experienced system builders, system providers,application specialists and expert robot integrators. KUKA robots are utilized in many different facets of the robotics industry fromautomotive, aerospace, consumer goods, logistics, food, pharmaceutical, medical,foundry and plastics industries and in multiple applications including materialhandling, packaging, palletizing, welding and surface finishing. For moreinformation contact KUKA Robotics at 866-873-5852 or visit their website at. About the KUKA Robot GroupKUKA Roboter GmbH, Augsburg, is a member of the KUKA Aktiengesellschaft andranks among the world`s leading suppliers of industrial robots.

Corecompetencies are the development, production and sale of industrial robots,controllers, software and linear units. The company is the market leader inGermany and Europe, and the number three in the world The KUKA Robot Groupemploys about 2,200 people worldwide. Of these, 1,200 are employed in Germany,either at the KUKA Robot Group headquarters in Augsburg, or at varioussubsidiaries In 2008, sales totaled 474 million euro. Twenty-six subsidiariesprovide a presence in the major markets of Europe, America and Asia.The KUKA logo is a registered trademark of KUKA Roboter GmbH KUKA, is atrademark of KUKA Roboter GmbH.